Basic CPU module CX1030
Ethernet connection
(port 1)
Battery compartment
Ethernet connection
(port 2)
Labelling area
 Status
 display
 PC/104
 interface
 Compact
 Flash insert
 Ejector
 Cartridge

CX1030 | Basic CPU module

The CX1030 basic CPU module offers Pentium® M power on the DIN rail. The CX1030 has a 1.8 GHz Intel® Pentium® M CPU. The CPU is cooled via the cooling module and an easily exchangeable fan cartridge located on the underside of the housing. The fan speed can be read via software and can therefore be monitored.

In addition to the CPU and the chipset, the CX1030 module also contains the RAM, which is available in different sizes. The controller boots from the Compact Flash. The basic configuration of the CX1030 includes a 128 MB Compact Flash card and two Ethernet RJ45 interfaces. These are connected to an internal switch and offer a simple option for creating a line topology without the need for additional Ethernet Switches. All other CX family components can be connected via the PC/104 interface that is available on both sides. The passive cooling module is included in the scope of supply.

The operating system can be Windows Embedded CE 6 or Windows Embedded Standard 2009. The TwinCAT 2 automation software transforms a CX1030 system into a powerful PLC and Motion Control system that can be used with or without visualisation. In contrast to the CX1010, the CX1030 can also be used for interpolating axis movements with TwinCAT 2 NC I.

Further system interfaces or fieldbus connections can be added to the basic CPU module. The CPU module requires a CX1100-001x type power supply module. All CX1500 fieldbus modules and all CX1100-001x power supply units from the CX series can be used in combination with the CX1030.

 

The order identifier of the basic CPU module is derived as follows:

CX1030 Basic CPU module

Technical data CX1030
Processor Intel® Pentium® M, 1.8 GHz clock frequency
Flash memory 128 MB Compact Flash card (optionally expandable)
Internal main memory 256 MB DDR RAM (expandable to 512 MB, 1 GB)
Interfaces 2 x RJ45 (Ethernet, internal switch), 10/100 Mbit/s
Cooling cooling module + fan cartridge featuring speed control with double ball bearing fans, easily replaceable
Diagnostics LED 1 x power, 2 x LAN link/activity, TC status, 1 x flash access
Expansion slot 1 x Compact Flash type I+II insert with eject mechanism
Clock internal battery-backed clock for time and date (battery exchangeable)
Operating system Microsoft Windows Embedded CE 6 or Microsoft Windows Embedded Standard 2009
Control software TwinCAT 2 PLC runtime, NC PTP runtime, NC I runtime
System bus 16 bit ISA (PC/104)
I/O connection via power supply module (E-bus, K-bus, K-bus/IP-Link)
Power supply via system bus (through CX1100-0012 [K-bus], CX1100-0013 [K-bus, IP-Link], CX1100-014 [E-bus] power supply module)
Max. power loss 32 W (including CX1030-N0xx system interfaces)
Dimensions (W x H x D) 96 mm x 112 mm x 99 mm
Weight approx. 580 g
Operating/storage temperature 0…+50 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protection class IP 20
Approvals CE, UL
Ordering information DVI/USB no operating system Windows Embedded CE 6 Windows Embedded Standard 2009 no TwinCAT TwinCAT 2 PLC runtime TwinCAT 2 NC PTP runtime TwinCAT 2 NC I runtime
CX1030-0000 x x
CX1030-0010 x x
CX1030-0011 x x
CX1030-0012 x x x
CX1030-0013 x x x x
CX1030-0100 x x x
CX1030-0110 x x x
CX1030-0111 x x x
CX1030-0112 x x x x
CX1030-0113 x x x x x
CX1030-0020 x* x
CX1030-0021 x* x
CX1030-0022 x* x x
CX1030-0023 x* x x x
CX1030-0120 x x* x
CX1030-0121 x x* x
CX1030-0122 x x* x x
CX1030-0123 x x* x x x
Accessories  
CX1900-00xx Optionally expandable memory ex factory.
Instead of 128 MB Compact Flash card: 1, 2, 4 and 8 GB Compact Flash card
CX1900-00xx Aditionally expandable memory: 1, 2, 4 and 8 GB Compact Flash card
CX1900-001x Formatting a Compact Flash card (bootable)
CX1900-0200 Universal plastic labels (5 x 15 mm) suitable for the premoulded spots on the CX components

*CX1030 systems with Microsoft Embedded Standard 2009 require Compact Flash with a capacity of at least 2 GB (must be ordered separately).