Basic CPU module CX1010
Ethernet connection
Battery compartment
Labelling area
 Status LEDs
 PC/104 interface
 Compact Flash
 insert
 Ejector

CX1010 | Basic CPU module

The CX1010 CPU module is the basic module of the CX system. It comprises the CPU and the internal flash memory in two implementation levels and offers the option to operate an additional memory medium in Compact Flash format II. An Ethernet interface is part of the basic configuration. All other CX family components can be connected via the PC/104 interface that is available on both sides. The CPU module can be equipped with different hardware and software options: the operating system can be Windows Embedded CE 6 or Windows Embedded Standard 2009.

The basic configuration of the CX1010 includes a 128 MB Compact Flash card. The TwinCAT 2 automation software transforms a CX1010 system into a powerful PLC and Motion Control system that can be operated with or without visualisation. Further system interfaces or fieldbus connections can be added to the basic CPU module. The passive cooling module is included in the scope of supply. The CPU module requires a CX1100 type power supply module.

 

The order identifier of the basic CPU module is derived as follows:

CX1010 Basic CPU module

Technical data CX1010
Processor compatible with Pentium® MMX, clock frequency 500 MHz
Flash memory 128 MB Compact Flash card (optionally expandable)
Internal main memory 256 MB DDR RAM (not expandable)
Interfaces 1 x RJ45 (Ethernet), 10/100 Mbit/s
Diagnostics LED 1 x power, 1 x LAN speed, 1 x LAN activity, TC status, 1 x flash access
Expansion slot 1 x Compact Flash type II insert with ejector
Clock internal battery-backed clock for time and date (battery exchangeable)
Operating system Microsoft Windows Embedded CE 6 or Microsoft Windows Embedded Standard 2009
Control software TwinCAT 2 PLC runtime or TwinCAT 2 NC PTP runtime
System bus 16 bit ISA (PC/104)
I/O connection via power supply module (E-bus, K-bus, K-bus/IP-Link)
Power supply via system bus (through CX1100-xxxx power supply modules)
Max. power loss 8 W (including the system interfaces CX1010-N0xx)
Dimensions (W x H x D) 58 mm x 120 mm x 91 mm
Weight approx. 355 g
Operating/storage temperature 0…+50 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protection class IP 20
Approvals CE, UL
Ordering information DVI/USB no operating system Windows Embedded CE 6 Windows Embedded Standard 2009 no TwinCAT TwinCAT 2 PLC runtime TwinCAT 2 NC PTP runtime
CX1010-0000 x x
CX1010-0010 x x
CX1010-0011 x x
CX1010-0012 x x x
CX1010-0020 x* x
CX1010-0021 x* x
CX1010-0022 x* x x
CX1010-0100 x x x
CX1010-0110 x x x
CX1010-0111 x x x
CX1010-0112 x x x x
CX1010-0120 x x* x
CX1010-0121 x x* x
CX1010-0122 x x* x x
Accessories  
CX1900-00xx Optionally expandable memory ex factory.
Instead of 128 MB Compact Flash card: 1, 2, 4 and 8 GB Compact Flash card
CX1900-00xx Aditionally expandable memory: 1, 2, 4 and 8 GB Compact Flash card
CX1900-001x Formatting a Compact Flash card (bootable)
CX1900-0200 Universal plastic labels (5 x 15 mm) suitable for the premoulded spots on the CX components

*CX1010 systems with Microsoft Embedded Standard 2009 require Compact Flash with a capacity of at least 2 GB (must be ordered separately).